WINDOW TINTING TODAY

In this post at Window Tinting Today , The Tint Shop will go through Part 1 basic tools needed for the procedure and preparation of  tinting installation. Here we will begin with the variuos types of Sqweegeee Tools

8″ Pro Squeegee Deluxe (AT-064)

A “finishing” (installation) squeegee as a ready-to-use assembly. Used to remove application solution from beneath the film during the installation of all film types.

6″ Pro Squeegee Blade (AT-063)

8″ Pro Squeegee Blade (AT-061)

Replacement blade to the 6″ AND 8″Pro Squeegee (AT-062) used as a means of removing application solutions from beneath the film during the installation of all film types.

6″ Flatfoot Squeegee Blade (AT-069)

8″ Flatfoot Squeegee Blade (AT-059)

Flatfoots are specially angled blades for the Pro Squeegee. The angle is designed to maximize the surface area in contact with the film, thereby removing much more mounting solution than a standard Pro blade with a square edge. These are special order items, please call for availability.

18.5″ Yellow Blade (AT-147)

Economy size squeegee usually cut to shorter 4-5″ lengths before use. Used for removal of application solution during the installation process. (Handle sold separately.)

Red Devil Squeegee (AT-033)

Angled, high durometer squeegee. Excellent for corners.

Teflon Edge Squeegee (AT-086)
While not actually made of Teflon, this tool is often called the Teflon “hard-card” or “edge tool.” It is an essential tool for every installer in every installation situation. When wrapped in a layer of cotton fabric or lint-free paper towel, it is used for a) cleaning into corners and along edge gaskets (during glass preparation), b) wicking water out along borders (after an installation). Moreover, it can be used for c) direct squeegeeing of film along borders without any wrapping, and d) edge trimming by using it as a blade-guide, creating a uniform tiny gap between the film edge and the perimeter gasket or frame. Finally, e) it’s used to retract gaskets to slip underneath. It is extremely hard, yet (if clean) will not scratch SR-coated film. Edge sharpness can be maintained by using AT-068 Hard Card Sharpener. Installers often cut down the tool beginning at the middle top in a straight line to the lower right corner. This angularity allows the tool to penetrate into corners for cleaning and squeegeeing purposes.

Diamond Tip (AT-113)
The new Diamond Tip Squeegee has several advantages. As well as the rounded tip, it has a pointed tip for better ability to reach into small window corners. Also, the raised edges in the body of the squeegee make it easier to grip and less likely to slip out of your hand when it’s wet.

Hard Card Sharpener (AT-068)

This sharpening tool is essential for maintaining the sharpest, smoothest possible edge on any thin, “hard edge” tool. Saves money by extending the life of these tools by more than a hundred-fold. Has replaceable blade: just use a few segments a stainless steel Ofla blade, remove and replace with screw driver underneath. An amazing tool which works like a wood plane.

Contour Squeegee (Soft) (AT-201GRN)

This tool automatically spreads out finger tension which makes it the premier applicator for non-flat surfaces. Perfect for automotive and paint protection installations.

Contour Squeegee (Firm) (AT-201YLW)

This tool automatically spreads out finger tension which makes it the premier applicator for non-flat surfaces. Perfect for automotive and paint protection installations.

Here we will Conclude Prt 1 of Tinting Tools For Installation continue browsing the Tint Shop for Prt 2. All tools shown and mentioned courtesy of Courage Distributing Inc.

Copyright Notice. Copyright © 2004 Courage Distributing Inc.., 2170 Dunwin Dr. Unit 27, Mississauga, Ontario Canada L5L 5M8. All rights reserved. You should assume that, unless otherwise indicated, all material on this site is owned by Courage and is protected by the copyright and other laws of Canada, its treaty countries, and other jurisdictions.

Olfa Silver Knife (AT-2103)

Use this stainless steel knife for film pattern cutting and trimming. Use only stainless steel blades with breakaway points to minimize likelihood of glass scratching.

Olfa Pro Load (AT-PA2)

New expert series Pro-Load multi-blade cutter for window tinting can hold up to five blades at a time, giving you 65 new cutting segments per load. Unlike other multi-blade cutters, this cutter allows you to use every segment before disposing – you will not waste blades!

Auto Lock 8 pt. Knife (AT-2105-H1)

Heavy-duty knife with breakaway points for use with security films 7 mils or greater.

Olfa Stainless Steel Snap Blades (AT-1145)

Replacement blades for standard window tinting installation knives (AT-2103, AT-2109, AT-2107). Stainless steel blades must be used to avoid or reduce the risk of scratching glass. Remember to always use low cutting angles when cutting on glass surfaces. Pack of 50 blades.

Olfa Carbon Snap Blades (AT-2244)

Replacement blades for standard installation knives (AT-2103, AT-2109, AT-2107). Be aware that these are not stainless steel. Stainless steel blades must be used to avoid or reduce the risk of scratching glass. Pack of 50 blades.

Some situations may arise where old tint must be removed before new tint can be applied. For this task we incorporate the use of a scraper tool, each has a design purpose.

1″ Heavy Duty Razor Scraper (AT-RS300)

This scraper uses standard single-edged razor blades. Excellent for safety, grip strength, and maximum leverage where small blades are needed for film or other glass contaminant removal.

1″ Heavy Duty Razor Scraper (AT-RS300)

This scraper uses standard single-edged razor blades. Excellent for safety, grip strength, and maximum leverage where small blades are needed for film or other glass contaminant removal in window tinting

1″ Single Edge Razor Blades (AT-1209)

Razor blades can be used alone or with AT-138, AT-212, & AT-199 for necessary glass cleaning/scraping. 100 blades per pack.

1″ Stainless Steel Single Edge Razor Blades (AT-137)

Razor blades can be used alone or with AT-138, AT-212, & AT-199 for necessary glass cleaning/scraping. 100 blades per pack.

3″ Triumph Scraper (AT-210)

Smaller version of the AT-107; very handy for smaller windows. Works better than the 6″ Triumph for automotive window tinting film removal on side windows. Best used on residential applications for smaller windows. Extremely efficient. Highly recommended.

3″ Triumph Blades (AT-211)

For use with the 3″ Triumph Scraper AT-210. 25 blades per pack.

4” Scraper with 6″ Handle (AT-103)

4″ Scraper Blades (10/pk)  (AT-105)

6″ Triumph Scraper MK II (AT-107)

Scraper used in the first phase of glass preparation when window tinting.. Not for automotive use because of its blade length and inability to conform of compound-curved glass. Light weight, easy to use, and extremely efficient at removing contaminants. Absolutely essential window tinting tool for all flat glass installers. Use a 4-inch scraper like AT-103 or AT-104 to strip old film first, then use this scraper for final window preparation (adhesive removal. “Class A” recommendation!)

6″ Triumph Scraper w/ Cover (AT-107PC)

Known as the “Triumph 2000,” this new version has all the features of the standard AT-107 but now has a built-in protective cover that can be operated with a flick of the thumb. No more fumbling with a separate blade cover. Safer and more convenient, especially when doing ladder work. Great for regular window cleaning, but not recommended for stripping off old film.

6″ Triumph Blades (AT-108)

For use with any of the 6″ Triumph Scrapers. 25 blades per pack.

6″ Stainless Steel Triumph Blades (AT-108SS)

Stainless steel version for use with any of the 6″ Triumph Scrapers. 25 blades per pack.

This will conclude Window Tinting Tools for Installation at The Tint Shop. Continue browsing window Tinting Today fo Prt. 3. All tools shown and mentioned courtesy of Courage Distibuting Inc.

Copyright Notice. Copyright © 2004 Courage Distributing Inc.., 2170 Dunwin Dr. Unit 27, Mississauga, Ontario Canada L5L 5M8. All rights reserved. You should assume that, unless otherwise indicated, all material on this site is owned by Courage and is protected by the copyright and other laws of Canada, its treaty countries, and other jurisdictions.